Quickly replace your Gen5 pressure release filter with this sealed cap!
This is for our standard size 3″ cans breather lid only at this time (DOES NOT FIT 3.5″ XL)
This temporarily sets the can up with a sealed top of the can instead of the auxiliary vent.
It is useful for extreme fumes control or visual inspection aid.
Made in the USA!
A Mightymouse Solutions Exclusive!
THESE ARE NOT RECOMMENDED FOR ROAD TRACK CIRCUIT USE
Hawk Head or Demon bracket available by special request on the shopping cart notes.
Draft can set up with -8AN Fittings
PCV can set up with -10 or 12AN inlet for 1000 or 1200hp of crankcase pressure control and super check exit
THESE ARE NOT RECOMMENDED FOR ROAD TRACK CIRCUIT USE
The S/C (supercharger) mount is the one with the cat head on it. The fender mount does not have the cat head on it. DEMON bracket available by special request on the shopping cart notes.
NOW ALSO FITS REDEYE!
Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.
Large Five Layer Performance Air Filter:
Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 8.5” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
OR
Large Three Layer Performance Air Filter:
Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 8.5” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
FCA Multi-Air Unit Actuator:
For the 2019-2020 Models, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake coupling. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.
Premium Hardware:
Premium stainless steel T-bolt clamps and a flexible bellows silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Fitment Note:
This product will not fit the Challenger SRT Demon and SRT Hellcat Redeye. See part number 57-10001R or 57-10001D for those models.
Emissions Disclaimer:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Aggressive Sound:
This system produces an aggressive sound unleashing all available horsepower and torque.
Installation:
Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation.
Computer-Aided Design:
Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.
MIG-Welded:
100% MIG-Welded for race-proven strength and durability.
Emissions Disclaimer:
This product does not require a CARB EO#.
aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.
]]>OR
Large Three Layer Performance Air Filter:
This 7” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. This Track Series air filter was specially designed for the Demon/Redeye and features a carbon fiber top.
Dyno-Tuned Carbon Fiber Intake Tube:
A 100% high gloss twill weave carbon fiber intake tube is used achieve maximum power gains while maintaining a perfect fit and reducing weight.
Heat-Resistant Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the massive air filter, yet seals to the hood to gather air from the factory hood scoop. The housing also connects to the factory headlight air inlet thanks to the scoop inlet provided.
Premium Hardware:
This is a direct fit intake system that utilizes factory mounting points. All necessary T-bolt clamps, a silicone bellows coupling, and all other hardware is included.
FCA Multi-Air Unit Actuator:
For the SRT Hellcat Redeye, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake tube. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.
Emissions Disclaimer:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Measured Flow at 7”H2O:
560 CFM on Challenger equipped with V8-6.4L
690 CFM on Challenger equipped with V8-6.2L(sc)
495 CFM on Challenger equipped with V8-5.7L
360 CFM on Challenger equipped with V6-3.6L
SRT Hellcat Factory air box:
The lower portion of the SRT Hellcat factory air box is a direct replacement for your factory air box and includes a direct-fit opening to connect to the “Air Catcher” headlight inlet available on all 2015 and up Dodge Challengers.
Lower Intake Air Temperatures:
The Dynamic Air Scoop directs more cooler, ambient air from outside the vehicle directly into your intake system. Cooler, denser air into your throttle body improves performance.
Durable LLDPE Construction:
This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable.
Pro 5R Filter:
This filter features five layers of pre-oiled cotton gauze media to provide maximum performance. Its progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R air filters are washable and reusable. The Pro 5R filter media is surrounded by a durable 100% polyurethane frame with a progressive bump seal design that conforms for a secure seal.
Click here for more information about our filter media.
Hassle-Free Installation:
Inspired by the Challenger SRT Hellcat, this Dynamic Air Scoop easily snaps into the SRT Hellcat factory air box and requires no modification to your vehicle.
Fitment Note:
This item will not fit models equipped with R/T SCAT PACK or Rhombi Illuminated air catcher headlamp. See 50-70009S for those models.
Emissions Disclaimer:
This product does not require a CARB EO#.
Carbon Fiber Construction:
This D.A.S. is manufactured from 100% carbon fiber material. It is lightweight and finished with clear coat on top of the plain weave carbon fiber for the highest quality construction.
Hassle-Free Installation:
Inspired by the Challenger SRT Hellcat, this Dynamic Air Scoop works with both factory (requires Hellcat factory airbox), aFe POWER Momentum GT intake systems (P/N: 51/54-72201; 51/54-72202 and 51/54-72203) and aFe POWER Black Series Carbon Fiber intake systems (P/N: 52-72205-CF; 52-72204-CF and 58-10003R/D). This part easily snaps into the air box and requires no modification to your vehicle.
Fitment Note:
This item will not fit models equipped with R/T SCAT PACK or Rhombi Illuminated air catcher headlamp. See 50-70009S for those models.
Emissions Disclaimer:
This product does not require a CARB EO#.
Dyno-Tuned Carbon Fiber Intake Tube:
Lightweight high gloss clear-coated plain weave 100% carbon fiber tube (no fiberglass) to achieve maximum power gains while maintaining a perfect fit, and the entire intake assembly weighs 5% less than OE. This tube has a built-in resonance chamber to catch un-wanted air intake noises.
Massive 8.5″ High Performance Air Filters:
This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive (6.75″ x 4.75″) oval flange and is 8-1/2″ tall. Both our Oiled and Oil-Free filter medias are included in this kit.
The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is built for maximum performance and flow. The Pro DRY S performance air filter features 3-layers of non-woven synthetic “oil-free” media has excellent filtration and was built for convenience. Both filters are constructed with a 100% polyurethane frame for long life and multiple cleaning cycles.
Black Series Momentum Air Intake System:
Also included in the kit is a Black Series serialized plate to ensure the authenticity of the intake.
Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Emission Disclaimer:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.