Quickly replace your Gen5 pressure release filter with this sealed cap!
This is for our standard size 3″ cans breather lid only at this time (DOES NOT FIT 3.5″ XL)
This temporarily sets the can up with a sealed top of the can instead of the auxiliary vent.
It is useful for extreme fumes control or visual inspection aid.
Made in the USA!
A Mightymouse Solutions Exclusive!
Premium Hardware:
High quality hardware is used for strength and durability. New connecting rods are included to reposition the front ride height sensors so all driving modes remain available. Polyurethane spring isolators allow the top plates of the OE shocks to be switched in order to prevent the springs from bowing.
Installation:
Installation of these 2.0-inch leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does require disassembly of the strut/spring. A spring compressor is not required due to the light amount of preload on the stock coil springs and extended shaft studs.
Emissions Disclaimer:
This product does not require a CARB EO#.
Aggressive Sound:
This system deletes the factory mufflers, and produces an aggressive sound unleashing all available horsepower and torque.
Installation:
Cutting is required, see instruction sheet for further information. Utilizing a factory style hanger this system mounts directly to factory mounting locations for a hassle-free installation.
Computer-Aided Design:
Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed precise fitment.
MIG-Welded:
100% MIG-Welded for race-proven strength and durability.
Emissions Disclaimer:
This product does not require a CARB EO#.
aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.
]]>Performance Gains:
This system produced gains of up to +11 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno.
Integrated Mitered Merge X-Pipe and Crossover Design:
Both mitered merge x-pipe and crossover balance tube replaces mufflers to evenly distribute exhaust pulses which maximizes scavenging, reduces drone and improves sound.
Aggressive Sound Without Compromise:
On the throttle, this system produces an aggressive, deep exterior sound releasing horsepower and torque. At cruising RPM’s the Vulcan maintains sound quality in the cab.
MIG-Welded 304 Stainless Steel:
MIG-welded, 3 IN mandrel-bent 304 stainless steel tubing increases to 3-1/2” diameter tailpipes for a “Large Bore” style exhaust.
Dual 6 IN Diameter Black Exhaust Tips:
Dual 6 IN large diameter, 304 stainless steel exhaust tips with matte black finish features laser-etched aFe POWER logo’s for a unique style.
Installation:
Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.
Emissions Disclaimer:
This product does not require a CARB EO#.
aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.
]]>1-7/8 IN 304 Stainless Steel Construction:
This system is constructed of 1-7/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability.
Heavy Duty Flanges:
Factory style laser cut machined flanges are used used for a secure leak-free seal.
Mitered Collectors:
4-to-1 mitered merge collectors decrease turbulence and increase exhaust velocity. The result is increased power and improved throttle response.
Installation:
Utilizing factory flanges this system is designed to fit in the stock locations with no cutting or modifications required for a hassle-free installation.
Factory Mounting Locations:
These headers retain your stock catalytic converters and factory O2 sensor locations for a direct bolt-on installation that requires no cutting or modifications.
Computer-Aided Design:
Utilizing state-of-the-art computer-aided design technology, this false is designed for custom, high tolerance factory fitment.
MIG-Welded:
100% MIG-Welded for race-proven strength and durability.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.
]]>OR
Pro DRY S Filter Media:
This filter features three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity. This media is best suited for street use. Pro DRY S filters are easily recharged with aFe’s POWER CLEANER.
100% Carbon Fiber Intake Tube:
The lightweight tubes are computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, they feature zero fiberglass and are clear-coated for the highest quality construction.
Premium Components:
Stainless-steel clamps and silicone couplings are used for strength and durability.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Legend Sound
We designed this Legend system with the daily-driver in mind, improved tone with restrained loudness. A system that still gets the blood flowing, but allows for a comfortable ride.
Redline Sound
We designed this Redline system to maximize the volume and tone of the engine, while still eliminating any drone in the cabin. Resulting in a feeling that will make you want to high-five your friends in the face.
Stainless Works Header Kits are built from corrosion resistant 304 stainless steel, our headers are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.
Features:
For use with:
Will not work with stock UNPORTED Supercharger.
Requires Engine Calibration.
]]>OR
Pro DRY S Dual Three Layer Performance Air Filters:
A pair of 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. The progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The inverted tops makes for more filter surface area, resulting in longer service intervals.
Filter-to-Housing Interface:
Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filters can be easily removed from the housing for maintenance by only uninstalling the side intake tubes.
Unique One-Piece Housing:
The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A massive clear sight window allows for hassle-free filter inspection without having to disassemble your intake system. The housing incorporates both the factory hood air inlet scoop and the grille inlet using no additional hardware.
Dyno-Tuned Intake Tube:
This system features a trio of high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Our XLPE material is heat soak resistant and extremely durable.
Premium Components:
Stainless-steel T-bolt clamps are included for strength, and a premium silicone coupling allows for ample flexibility and durability. Momentum GT intakes are designed with fewer parts for a fast and easy installation.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
We have seen 40-60rwhp gains on 2.4L (Hellcat/Trackhawks/Durango HC/TRX) Superchargers paired with a 105mm Throttle body, and 80-125rwhp gains on 2.7L (Demon/Redeye) Supercharger paired with a 105mm Throttle body!
We also keep core Hellcat / Demon snouts in stock for quicker turn around times through our CORE Exchange Program.
No need to send your supercharger snout off for porting and wait for it to come back! We have you covered!
We will send you a ported Hellcat or Demon snout right to your door ready to install! You will need to remove the sensors from your stock supercharger snout, and install them onto the new ported snout we send. You have 14 days from the time that the ported snout arrives to return your stock supercharger snout to us. When it is returned, we will send you back a core fee of $450 for a Hellcat supercharger snout. We will send $900 back for a Demon supercharger snout. If we do not receive tracking information or any communication within the 14 day period, the customer will not be refunded any money.